Author Topic: Propeller shaft  (Read 5512 times)

0 Members and 1 Guest are viewing this topic.

Offline trevor@reach.net

  • Newbie
  • *
  • Posts: 4
Propeller shaft
« on: July 26, 2011, 12:18:59 PM »
I hit a rock shoal going very slow and bent my brass prop and prop shaft. Looks like the prop is going to be repairable but I need a new shaft. Any ideas on a good used one? My boat is a 1994 Advance with the 240 HP Indmar in it. I am also looking for a new console / dash.
Thanks, TC.

Offline Mike Harry

  • Captain
  • Hero Member
  • *****
  • Posts: 1042
  • 1986 American Skier Barefoot Skier
Re: Propeller shaft
« Reply #1 on: July 26, 2011, 01:48:51 PM »
Ron Tanis is who you need to talk to, or his brother Dan.

As far as your dash, I have one but its from an 86 advance and may not be set up exactly the same. With that being said, I made one from my original pattern out of mahogany,  check out my photobucket on the bottom of this post for pics. It may give you some ideas.