Author Topic: Looking for hinges  (Read 6346 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike Harry

  • Captain
  • Hero Member
  • *****
  • Posts: 1042
  • 1986 American Skier Barefoot Skier
Looking for hinges
« on: June 12, 2010, 11:59:01 AM »
The type used on the rear of the motor cover. Mine have been lost by myself or the last owner who took them off to begin with. Cand find any that look like the type I have seen in pictures.

Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1202
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: Looking for hinges
« Reply #1 on: June 15, 2010, 07:22:45 AM »
I have several types here that have been used over the years, do you need one side only or both. If only one side needed, forward a picture of the one you have, and or a description of what you had..slide apart style, split hinge w/pin etc...

Offline Mike Harry

  • Captain
  • Hero Member
  • *****
  • Posts: 1042
  • 1986 American Skier Barefoot Skier
Re: Looking for hinges
« Reply #2 on: June 15, 2010, 07:41:22 AM »
Ron, I wish I could give you a picture,  but I don't have either one. I think I want the style that slides out to the side. I can use anything I want I guess, cause everything is new (as far as the floor goes) and I'm going to be putting new holes in anyway. Let me know what you get for a pair.

Mike

Offline lakeorion

  • Jr. Member
  • **
  • Posts: 10
  • Boat Make/Model/Year: 1989 American skier
Re: Looking for hinges
« Reply #3 on: June 13, 2013, 11:44:55 AM »
 am also looking for hinges for a 1989 american skier. The top lift off cover for the motor. When you go to look at the motor you lift the top cover not the whole cover. Got any?

Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1202
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: Looking for hinges
« Reply #4 on: June 13, 2013, 12:25:03 PM »
I think i have some of these, but can't confirm until i get home from the A/S reunion.

Offline Joel

  • Hero Member
  • *****
  • Posts: 1022
Re: Looking for hinges
« Reply #5 on: June 17, 2013, 08:08:52 PM »
That's called a "clamshell" engine cover I think...    ;D
Joel - Columbus, OH - 1991 Advance