Author Topic: CUTLASS BEARING OR STRUT AND CUTLASS BEARING  (Read 2649 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnny M

  • Jr. Member
  • **
  • Posts: 14
  • Boat Make/Model/Year: 1994 American Skier TBX
CUTLASS BEARING OR STRUT AND CUTLASS BEARING
« on: October 01, 2013, 01:39:21 PM »
NEED A CUTLASS BEARING FOR 1994 TBX I live in Canada and finding this is becoming a problem I may have to buy a strut and bearing but would prefer not to.   thanks












Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1195
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: CUTLASS BEARING OR STRUT AND CUTLASS BEARING
« Reply #1 on: October 01, 2013, 02:19:48 PM »
A 94' TBX was made by WESMAR & probably has a 1" dia. shaft, 1997+ TBX's had 1.125" dia. shafts. You need to confirm the shaft diameter before ordering replacement bearings, I stock the pre-cut, ready to install OEM Johnson Bearings. If needed email me direct at Ron @ RonTanis.com

Offline Johnny M

  • Jr. Member
  • **
  • Posts: 14
  • Boat Make/Model/Year: 1994 American Skier TBX
Re: CUTLASS BEARING OR STRUT AND CUTLASS BEARING
« Reply #2 on: October 01, 2013, 08:56:43 PM »
Thanks Ron, I did not want to bother you, perhaps I will send you my shopping list