Author Topic: Driveshaft for Lazair  (Read 3976 times)

0 Members and 1 Guest are viewing this topic.

Offline keehr22

  • Hero Member
  • *****
  • Posts: 84
Driveshaft for Lazair
« on: January 25, 2011, 09:23:26 AM »
Looking for a drive shaft for an '01 Lazair, not sure what common models use the same shaft

Offline brandon

  • Hero Member
  • *****
  • Posts: 156
Re: Driveshaft for Lazair
« Reply #1 on: January 25, 2011, 07:20:13 PM »
I have a shaft out of a Malibu Skier.  Send me a measurement (length from end to end and diameter) and what type of coupling end it has (tapered or square).  I think the one I have is a 1" and it is square ended, about 45" long.  If the end is different but the length is correct, I have the coupler which is a 4" to connect to the trans.  You can also just give me the measurement from the coupler face (on the shaft) to the end and I will see if this matches.  Let me know.

Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1202
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: Driveshaft for Lazair
« Reply #2 on: January 26, 2011, 07:42:22 AM »
Your boat takes a 1.125" dia. shaft, a 1" will not work (part # is TRD-10465)

Offline keehr22

  • Hero Member
  • *****
  • Posts: 84
Re: Driveshaft for Lazair
« Reply #3 on: January 28, 2011, 05:50:40 AM »
Thanks for the part number Ron, any way I could get a price on that Dan?